Category
:
COMPLETE WATER PIPELINE FILLING
Product Name
:
COMPLETE WATER PIPELINE FILLING 8.000 Bhp 1 LT
Product Description
:
 
Request a Bid
Products
NON-CARBONATED LIQUID FILLING MACHINE ()
1.Working system of the machine is rotary type.
2.The machine has 24 rinser, 36 filling and 8 closing unit.
3.Parts of the machine which touches the goods and the bottle is made of stainless steel and appropriate plastic for health.
4.Speed of the machine is controlled with variable speed drive.
5.Electrical hardware is set on the same body with the machine.
6.Machine height is adjusted with electrical motor.
7.The movement of the conveyor is synchronous with the machine.
8.During filling process, bottles are held from neck in order to be filled.   
9.Screwed cap is used in the closing unit.
10.The machine is covered with protective frames according to the “CE” norms.
11.The cap feeder works automatically.
12.Inlet of the machine conveyor has bottle stopper system.
13.Closing unit’s working system is “Pick&Place”, and the torque adjustment is magnetic.
14.PLC hardware of the machine can be adjusted by the means of modem connection.
15.The filling system is vacuumless, and also can fill the bottle easily whatever the bottle’s weight is.
16.Pneumatic equipments of the machine will be AIR-VORK  brand.
17.Electrical equipments will be TELEMECANIQUE and OMRON brand.
18.PLC system will be OMRON , FATEC brand.
19.Working principle of the rinser unit is “No Bottle-No Rinsing”.
20.PLC hardware of the machine can be adjusted by the means of modem connection from anywhere else.
CAP ELEVATOR ()
1.AISI 304 stainless steel
2.Conveyor belt is made of plastic material suitable for foodstuff rules.
3.Conveyor belt upper cover is made of transparent flexyglass in order to see the cap   flow easily.     
4.System is mobilize and active moving.
OPP LABELLING MACHINE ()
1.The machine body is made of st platinası, are coated with stainless steel over 304k.
2. Mechanical chassis legs and the body is completely made of stainless steel materials.
3. Mechanical belt at the entrance to the flow of bottles of bottles of regular spirals are.
4. Bottled flow automatically or manually on demand is to cut the bottle stopper.
5. the machine's existing filling lines, the easiest way to make connections and to prevent tipping the bottle, pass the bottle ready to use tape.
6.Label roll automatically stops when finished
7. Mechanical tension labels in attempt to stop the lift arm
8. the label roll off the machine stops automatically braking system
9.Label the carrier drum, only the glue of the recipient the opportunity to change
10.Bottle according to the flow acceleration and deceleration mode automatically
11.Touch screen, easy to use instant
12. To enter and you can change the screen size from the tag
13.PLC control system of cutting height on four labels combine with the desired extent.
14. Four labels to bring the cutting height to the desired extent.
BOTTLE CONVEYORS ()
1.Conveyors sides are produced 2,5 mm stainless steel.
2.Conveyors equipments are ARDOLET or UNI brand.
3.Conveyors speed is adjusted by variable speed drive.
4.Conveyors  sides are designed in order not to damage labels.
5.System has automatic-lubrication.
6.Conveyors have sensors in order to work automaticaly
7.Conveyors are controlled by PLC system.
AIR BOTTLE CONVEYORS ()
1.Cheeks, hair bands are manufactured from 1. 5  mm stainless steel.
2.ARDOLET as conveyor systems and equipment products are used in UNI.
3.Fan motor produces bottles with the air sent to the desired location.
4.Side conveyors available in the bottle will be designed not to harm.
5.Sensors will accumulate on the bottle conveyor
SHRINK MACHINE ()
1. 35 packs / min. capacity to work, full Automatic Shrink Wrap Machine type should be.
2. CE will be available for suitable protective cover.
3. Low friction coefficient is made of thermoplastic material input will feed conveyor.
4. Introduction of the detector will be tipping the bottle.
5.PLC control system with LCD touch screen will be.
6.Pneumatic spool shaft will release films. Roll film change is very easy and fast.
7.Dual Servo motor control unit is cut with a rotary film. Additional problems in using the traditional grip and maintenance costs are minimized.
8.Configuration changes and changes in product type a short period of time due to the simple design will be downloaded.
9.without sticking around for the bottle and shrink film wrapping feature will be without resources.
10.Film wrapping Antistatic bars will prevent sticking.
11.1250C º-temperature ceramic fiber insulation materials will be a tunnel. (Oven temperature 170-220 º C is average.)
12. oven to reduce heat loss in construction design will be bolted.
13.Oven and joints in connection with 5mm thick ceramic fiber insulation
materials will be made.
14. AISI 304 stainless steel coil heating elements on both sides of the oven is designed to be easily accessible.
15.PID Temperature Control System with Electronic precision temperature control and can provide high energy savings.
16. is made of galvanized materials of furnace construction is long lasting.
17. OMRON PLC control unit, the brand will be Allen Bradley or TRIO.
18. Motion Control Card OMRON, Allen Bradley or trademark is TRIO.
19. OMRON Servo Motors and Drives, Allen Bradley or the Panasonic brand will be.
20. Pneumatic equipment is brand CAMOZZI.
21. Electrostatic powder painted sheet metal parts and will cover construction.
22. metal-framed glass sliding doors will be transparent.
23. Max. Packing dimensions: Height 450 mm, width 300 mm 500 mm will.
24.Power supply: 380V - 3 Phase, 50Hz.
25.Installed power up to 30 kW, 15/20 kW average power consumption will be.
26. Air consumption: 50 liters / min.
27. Working Pressure: 6 bar
28.Control voltage: 24 V DC
29.Film thickness: 30-80 microns
30. Film width: max.700 mm
31. Proper Film Type: Polyethylene PE
32. Shrink Tunnel is independently adjustable dual temperature heating unit (turbo system) will be. Each unit will be controlled by independent temperature control device.
33. Oven Mesh belt wear tape on the floor blocking the movement of the slides will be material.
34. All the electrical cables inside the tunnel of shielded cable is non-flammable ceramic fibers.
35. Electric motors: WATT, VOLT will mark or GAMA.
Electrical equipment: Telemecanique and Moeller will be the brand.
37. Motors, Yilmaz will be the brand.
38.the heating system in the machine-mounted turbo system and uniform system, it is easy to use and exchange.
39. Oven belt speed OMRON, Allen Bradley or TELEMECANIQUE brand and speed, adjustable speed control unit will be.
BOTTLE DATE CODING ()
Enregistrement de 100 messages
Chaque message enregistre 240 caractères
3 lignes de caractère d’écriture
La possibilité d’écrire le logo
La possibilité de choisir des symboles et des caractères spéciales
Le codage se fait avec l’utilisation de laser. l’encre n’est pas utilise
PALLET STRECH WRAPPER ()
1.Body of the machine is made of ST. material with EPOXY paint.
2.Pallets are wrapped with nylon.
3.Nylon stretch tension is automatically adjustable.
4.Automatically stops when over of wrapping.
5.Electrical equipments of panel are TELEMEQANİC brand.