A.WORKING PRINCIPLE:
It automatically wraps hand-lined cardboard pans or non-brazed products with polyethylene film in front of the push pin with adjustable guide and carries it to the tunnel with outlet band and makes the shrink packaging
GENERAL FEATURES OF THE PRODUCT
SEMI AUTOMATIC CUTTING AND WINDING UNIT:
1. Front feed
2. Speed adjustment product push piston.
3. Motor controlled automatic upper and lower film opening unit
4. With pneumatic system (FESTO)
5. PLC Controlled (OMRON)
6. PLC controlled aluminum cutting bonding jaw
7. Easy Replaceable Resistance System
8. Chin Length: 640 mm
9. Jaw Height: 400 mm
10. Capacity: Up to 10 Pack / Min (depending on product size) 11. Can work with polyethylene film of 40-70 micron thickness and width up to 600 mm.
SHRINK TUNNEL:
1. Tunnel temperature thermostat controlled
2. Tunnel conveyor speed can be adjusted with OMRON speed controller
3. Tunnel conveyor will be wire mesh wire mesh
4 .The top product height of the tunnel 400 mm - Highest possible product 260 mm
5. Electric Power: Consumption in the first 30 minutes at 24KW, consumption after 30 minutes at 12KW / hour
C. ELECTRONIC FEATURES
1. ELECTRICAL EQUIPMENT: EATON
2. ENGINE AND REDUCTORS: VARVEL
3. AUTOMATION: OMRON
4. PNEUMATIC SYSTEM: FESTO
5. CUTTING ADHESIVE: Teflon coated hot jaw
6. INSULATION: Ceramic Blanket
7. HEATING SYSTEM: Stainless CR-NI pipe is mounted on the sides of the tunnel.
8. BAND SPEED: With speed control unit and adjustable.
9. HOT AIR CIRCULATION: Provided with radial fan
D. PROCESS SAFETY OF THE PRODUCT
Quality Management System is operated in accordance with ISO 9001-2000 Standards. All product process flow is guaranteed.
All Physical, Functional and Electrical tests before shipment
(High Voltage Test, Leakage Current, Grounding, Insulation Resistance Test).
Machine is painted by water and corrosion resistant two-component epoxy primer and paint.
Note: Our company reserves the right to make changes in technical specifications of the machines as deemed necessary without prior notice