SM003 STICK TYPE 3 COLOR FLEXO PRINTIG MACHINE
 
Category
:
PAPER BAG, SLICING & LAMINATION MACHINES (EKO)
Product Name
:
SM003 STICK TYPE 3 COLOR FLEXO PRINTIG MACHINE
Product Description
:
Width of the machine is 110 cm and it has 3 colors printing unit for printing 105 cm, and it can print 3 colors on a single surface. The machine can print with cliche and transfer the dye  through tram cylinder. In-chamber cylinder is rubber, and the cylinder dyeing the cliche is the tram. (Cliche cylinder and tram cylinder are eloxal steel) The machine has roller loading engine and roller shaft is air-driven. There are two pieces of cylinders in the roller wrapping part and they are sometimes wrapping. Wrapping shaft is air-driven. Printing units on the machine are commanded by hydrolic
 
Request a Bid
Required Field:50 m2
Total Electricity Consumption:5 kW 380 V, 3 Phases 50 - 60 Hz
Origin:TURQUE
Capacity:150 Mt / Max
Number of Employees:1
Required / Air, Water and Fuel:6 Bar Air Presseure 100 Lt/Munite
Products
STICK TYPE 3 COLOR FLEXO PRINTIG MACHINE (SM003)
Width of the machine is 110 cm and it has 3 colors printing unit for printing 105 cm, and it can print 3 colors on a single surface. The machine can print with cliche and transfer the dye  through tram cylinder. In-chamber cylinder is rubber, and the cylinder dyeing the cliche is the tram. (Cliche cylinder and tram cylinder are eloxal steel) The machine has roller loading engine and roller shaft is air-driven. There are two pieces of cylinders in the roller wrapping part and they are sometimes wrapping. Wrapping shaft is air-driven. Printing units on the machine are commanded by hydrolic
 
General Features:
Working speed / min.Max.:150 mt
Printing area: 105 mm
Coil diameter (max) (B): 1200 mm
Coil Width (A): 750 mm
Coil Maximum Inner Main Diameter: 76 mm
Paper Weight (C): 35 - 190 gr / m2
Power requirement KW: 380 3 Phase 5 KW
 
PRODUCTS YOU CAN PRESS
Foil - Paper and Cardboard
Kraft Paper - Pelur Paper
the Cellophane
Nonwoven ”Nonwoven Surface
Coated paper
                
Machine dimensions:
Machine Length: 6000 mm
Machine Width: 2100 mm
Machine Height: 1900 mm
Machine Weight: 2,000 kg + 100 kg (Including spare parts)
                 
Unit of Coil Warping:
Air brake: Yes
Mechanical Brake: -
Magnetic Power Brake: -
EPC controller: Yes
Driving Motion: With Electric Motor
Synchronous belt: Yes
Synchronization wheel: Yes
Bearing: Yes-SKF
Guide roll: -
Air shaft tripping: Yes
Coil Loading: With Yes-Electric motor
Meter counter: Yes
                 
Flexo Print Group:
Color brand tracking photo-sensor: -
Position stabilization photo-sensor: -
Low voltage device: -
EPC Tension Control System: Yes
Automatic constant voltage: Yes
EPC engine: Yes
Infrared ray induction: -
Register Control System: -
Servo Control: Optional
Independent movement of paint rollers: Motion by hydraulic
UV drying: -
Printing Rolls: Anilok Çelik
- Cliché rollers work with helical gear according to the special 2.84mm plate. Optional module and plate thickness settings can be made.
- The color rails are made of special materials. They are coated with ink-resistant special coating. In addition, the machine is painted with ink and solvent-resistant paint and is suitable for wiping with ethyl acetate.
 
Winding unit:
Coils with a maximum diameter of 120 cm and an internal diameter of 76 mm can be used in the winding unit.
- The winding coils are compressed by means of a pneumatic inflatable shaft.
- The winding shaft is connected to the machine by means of locking wheels. The safety of the operator is max.
- Winding tension control is provided by DANCER controlled AC motor. The maximum tension is 300 N.
- The winding press roller which provides the ironing of the wound bobbins is a pneumatically operated and rubber coated roller.
 
Brand of Materials:
Servo motors: Omron or ABB Preferred by Omron brand
PLC or motion control: Omron Brand
Bearings: SKF
Blood Pressure Control: Turkey 
Other electrical materials: Shinider German Company
Machine is painted by water and corrosion resistant two-component epoxy primer and paint
Note: Our company reserves the right to make changes in technical specifications of the machines as deemed necessary without prior notice.
Made in Turkey
DOCTOR BLADE SYSTEM (Optional Feature) (SM003-B)
Doctor Blade System is a transfer method used in Flexo Printing Machines and Some Printing Machines. Print quality is much better than rubber machines. It is especially successful in tram passes in CMYK printed works.
* Suitable friction structure with anilox for full performance in stripping
* Structure with and without lamella
* 0,15 / 0,20 / 0.25 thickness
* Wide range of sizes from 10 mm to 90 mm
* Special carbon steel material with micro structure
* Long performance and smooth stripping especially in white paint
WAXER UNIT (Optional Feature) (SM003-P)
Maximum Working Speed: 100 m./min.
Products Available: 18-max.250 gr / m2 - Paper
Adjustable Paraffin Sliding: min 6g / m2
Machine is painted by water and corrosion resistant two-component epoxy primer and paint
Note: Our company reserves the right to make changes in technical specifications of the machines as deemed necessary without prior notice.
Made in Turkey
DRYING IR SYSTEM (Optional Feature) (SM003-U)
IR kurutma aparat farkı. 
IR drying apparatus Extra 
Note: Our company reserves the right to make changes in technical specifications of the machines as deemed necessary without prior notice.
Made in Turkey