G-240-L COMPLETE SET OF FULLY AUTOMATIC IN LINE PUNCH CROSS TEE (28*24) COLD ROLL FORMING MAIN MACHINE MAX 50 PCS MUN.
 
Category
:
MACHINES PROFILES FOR PLASTERBOARD & CEILING PLATE (PRO)
Product Name
:
G-240-L COMPLETE SET OF FULLY AUTOMATIC IN LINE PUNCH CROSS TEE (28*24) COLD ROLL FORMING MAIN MACHINE MAX 50 PCS MUN.
Product Description
:
From coil →Roll forming → Automatic punching & cut-off after forming → Finished products. Used in the manufacture of Ceiling T-bar production line profiles with different models. The energy consumption is lower due to its high speed and precision. Produce Ceiling T-bar profiles. Produced Ceiling T-bar profiles according to EN 14195 standards. The line runs from the coils. Reel tool change time is short.
 
Request a Bid
Required Field:Longueur: 20M * Largeur 3.5M * Hauteur 3.0M
Total Electricity Consumption:60 KW / 380 V/ 3 PHASE
Origin:TAIWAN & TURQUE
Capacity:600mm/2ft : Max. 50 PCs/ min. – 1200 Mm/4ft : Max. 25 PCs/min.
Number of Employees:3 Personne
Required / Air, Water and Fuel:8 Bar Air Presseure 7 L/Munite
Products
COMPLETE SET OF FULLY AUTOMATIC IN LINE PUNCH CROSS TEE (28*24) COLD ROLL FORMING MAIN MACHINE (G-240-L)
TECHNICAL FEATURES
SPECIFICATION
Commodity Item : One complete set of fully automatic In line punch
Cross Tee cold roll forming machine
Products profile : refer to AS-1340 (Cross Tee 28*24)
Raw material : Galvanized steel:Plate thickness : 0.3mm Pre-painted steel: Plate thickness :0.24-0.3mm
Machine model : G-240-L cold roll forming machine. (Fixed type)
Producing process :
From coil →Roll forming → Automatic punching & cut-off after forming → Finished products. (Refer to machine layout LAY-1340)
 
ADVANTAGES AND CAPACITY OF MACHINE :
Automatic producing continuously, max. capacity : Galvanized steel : Plate thickness :0.3mm Pre-painted steel : Plate thickness : 0.24-0.3mm
Forming roll transmitting system : Each step with one of worm gear reducer, turning simultaneously.
Forming line speed :
600mm/2ft : Max. 50 PCs/ min. Quick or slow speed can be adjusted.
1200Mm/4ft : Max. 25 PCs/min. Quick or slow speed can be adjusted. Hydraulic automatic punching & cut-off device :
Design with hydraulic power system, easy operation and keeping stead-going. Punching die use the material of SKD11, vacuum heat treatment,
Hardness up to HRC 58-61°, wear-resistance, good rigid structure and long life. Products length : 600mm/2ft or 1200mm/4ft .
Length tolerance within ±0.2mm.
 
ONE COMPLETE SET OF EQUIPMENT COMPRISING AS FOLLOWS :
A. UNCOILER FOR GALVANIZED STEEL : 1 UNIT
1. Loading capacity : 1,100 Kgs
2. Coil specification : O.D. 1,200 mm.I.D. 480 – 510 mm. Plate width : 150 mm.
3. By hand to tighten the coil.
4. Driven by the forming machine. one unit.

B. UNCOILER FOR PRE-PAINTED STEEL : 1 UNIT
1. Loading capacity : 250 Kgs
2. Coil specification : O.D. 1,200 mm.I.D. 480 – 510 mm. Plate width : 50 mm.
3. By hand to tighten the coil.
4. Driven by the forming machine.
 
C. COLD ROLL FORMING MACHINE : 1 UNIT
1. Model : G-240-L type. (Fixed type)
2. Forming steps : 16 stations with entry guide stand.
3. The main machine base is assembled by high-strength steel with precise welding
treatment. Each steps with one worm gear reducer, turning simultaneously.
4. Main driven motor : 10 HP motor with 10HP inverter .
5. Forming rollers : one full set. (For AS-1340; cross Tee 28*24)
6. Forming line speed :
600mm/2FT : Max. 50 PCs/ min. Quick or slow speed can be adjusted.
1200mm/4FT : Max. 25 PCs/min. Quick or slow speed can be adjusted.
7. Roll shaft : φ40mm, use S45C material.
8. Rolls: use the material SKD11 with vacuum heat treatment,
Hardness up to HRC 58-61°, wear-resistance, good rigid structure and long life.
9.Forming line speed : Max 32M/min. Quick or slow speed can be adjusted.
 
D. HYDRAULIC AUTOMATIC PUNCHING& CUT-OFF DEVICE : 1 UNIT
1. Punching die use the material of SKD11 with vacuum heat treatment, Hardness up to HRC 58 – 61, wear-resistance, long life.
2. Unique design gives trouble-free operation.
3. Cut-off length : 600mm/2ft or 1200mm/4ft Length tolerance within ±0.2mm.
4. Hydraulic pack (30 HP) : 1 set.
5. Hydraulic cooling system : 1 set.
6. Punching die : Head die:1 set
Tail die: 1 set
Double head die: 1 set Middle hole die: 1 set
 
F. PLC ELECTRIC CONTROL CABINET :1 UNIT
1. Programmable controllers : 1 set.(Mitsubishi)
2. Industrial man machine interface : 1 set. (Touch screen type)
3. Electric voltage : 380 Volt. 3 Phase 50 Hz(Please confirmed by the buyer)
Note: Our company reserves the right to make changes in technical specifications of the machines as deemed necessary without prior notice..
Made in Taiwan