TECHNICAL FEATURES
SPECIFICATION
Commodity Item : One complete set of fully automatic Main Tee (38*24) in line
punch cold roll forming machine. (with Ce certificate)
Products profile :
A. main machine: refer to AS-1339 (main Tee 38*24)
Raw material : Galvanized steel:
Plate thickness : 0.3-0.35mm Pre-painted steel:
Plate thickness :0.24-0.3mm
Machine model : G-240-L cold roll forming machine. (Fixed type)
Producing process :
From coil →Roll forming → Automatic punching & cut-off after forming → Finished products. (Refer to machine layout LAY-1339)
ADVANTAGES AND CAPACITY OF MACHINE :
1. Automatic producing continuously, max. capacity : Galvanized steel : Plate thickness : 0.3-0.35mm Pre-painted steel : Plate thickness : 0.20-0.3mm
2. Forming roll transmitting system : Each step with one of worm gear reducer, turning simultaneously.
3. Forming line speed : Max 40M/min. Quick or slow speed can be adjusted. Max 5-6 PCS/ min.(base on 3600mm).
4. Hydraulic automatic punching & cut-off device :
Design with hydraulic power system, easy operation and keeping stead-going. Punching die use the material of SKD11, vacuum heat treatment,
Hardness up to HRC 58-61°, wear-resistance, good rigid structure and long life. Products length : 3600mm/12FT.
5. Hydraulic automatic punching & cut-off device :
Design with hydraulic power system, easy operation and keeping stead-going. Punching die use the material of SKD11, vacuum heat treatment,
Hardness up to HRC 58-61°, wear-resistance, good rigid structure and long life. Products length : 3600mm/12FT.
ONE COMPLETE SET OF “ MAIN TEE” COMPRISING AS FOLLOWS :
A. UNCOILER FOR GALVANIZED STEEL : 1 UNIT
1. Loading capacity : 1,100 Kgs
2. Coil specification : O.D. 1,200 mm.I.D. 480 – 510 mm. Plate width : 150 mm.
3. By hand to tighten the coil.
4. Driven by the motor.
5. Driven motor : 2HP
B. UNCOILER FOR PRE-PAINTED STEEL : 1 UNIT
1. Loading capacity : 250 Kgs
2. Coil specification : O.D. 1,200 mm.I.D. 480 – 510 mm.Plate width : 50 mm.
3. By hand to tighten the coil.
4. Driven by the motor.
5. Drive motor : 1HP
C. COLD ROLL FORMING MACHINE : 1 UNIT
FROM: Jack Chang DATE: 24th Sep., 2015
REF: PF-1339 (Main Tee 38*24)

4. HYDRAULIC AUTOMATIC PUNCHING & CUT-OFF DEVICE 1 UNIT
Design with hydraulic power system, easy operation and keeping stead-going. Punching die use the material of SKD11, vacuum heat treatment,
Hardness up to HRC 58-61°, wear-resistance, good rigid structure and long life. Products length : 3600mm/12FT.
1. Model : G-240-L type. (Fixed type)
2. Forming steps : 20 stations with entry guide stand.
3. The main machine base is assembled by high-strength steel with precise welding
treatment. Each steps with one worm gear reducer, turning simultaneously.
4. Main driven motor : 15 HP motor with 20HP inverter .
5. Forming rollers and stands: one full set for main tee38*24 (AS-1339)
6. Roll shaft : φ40mm, use S45C material.
7. Rolls: use the material SKD11 with vacuum heat treatment,
Hardness up to HRC 58-61°, wear-resistance, good rigid structure and long life.
8. Forming line speed : Max 40M/min. Quick or slow speed can be adjusted.
9. .Product length : 3600mm/12FT
D. HYDRAULIC AUTOMATIC PUNCHING& CUT-OFF DEVICE : 1 UNIT
1. Punching die use the material of SKD11 with vacuum heat treatment, Hardness up to HRC 58 – 61, wear-resistance, good steel structure, long life.
2. Unique design gives trouble-free operation.
3. Cut-off length : 3600mm/12ft
4. Hydraulic pack (30 HP) : 1 set.
5. Hydraulic cooling system : 1 set.
6. Punching die : Head die:1 set Tail die: 1 set
Middle hole die: 21 sets.
E. AUTOMATIC PICK-UP PRODUCT DEVICE: 1 UNIT
Feature : Automatic pick-up the products after punching & cut-off.
F. PLC ELECTRIC CONTROL CABINET :1 UNIT
1. Programmable controllers : 1 set.(Mitsubishi)
2. Industrial man machine interface : 1 set. (Touch screen type)
3. Electric voltage : 380 Volt. 3 Phase 50 Hz (Please confirmed by the buyer)
Note: Our company reserves the right to make changes in technical specifications of the machines as deemed necessary without prior notice..
Made in Taiwan