SMS-I is a kind of two-stage type PET Semi-auto Stretch-Blow Molding Machine to produce
PET bottles from preforms. Its preform holder, which is used to support the preform, has been placed on
the chain-wheel unit, and only one worker is required to put perform onto machine's preform holder. T
hen, controlled by SIEMENS PLC system, the preforms on the holder will pass machine's heating area
driven by chain-wheel unit for heating, being blown into bottle and discharged from the machine in
turn and automatically
SMS2250I is a one-cavity platform conceived for PET containers up to 2.25 liters, with output up to
1000BPH for 500ml round water bottle with 30/25 neck.
Technical Data
Max. Output
For Water Bottles BPH: 1000*    
Fos CSD bottles BPH: 800*
Bottle Dimension
Outer Dia (Max.) MM: 108
Height (Max) MM: 340
Volume Range L: 0.25-2.5
Blow- molding Station  
Cavity number CAVITY: 1
Cavity Center Distance MM: 127
Preform Spindles Ptich MM: 127
Air Presseure for Operation Bar: 8-10
Pressure for blowing bar: 25-30
Colling Water Pressure Bar 4-5
Temperature C: 10-15

New-designed RCM series industrial chillers are used R407C environmental-friendly refrigerant
for efficient cooling. RCM series industrial chillers with P.I.D. control are capable of controlling
precisely the molding cycle and speed production formalization. The principle of heat exchange can achieve
rapid cooling, stable temperature controlling and will be little effected by the surrounding factors.
Therefore they are necessary good equipments modern industry. Except plastic industry, RCM series is
suitable electroplating, foodstuff, electronic products, bleaching and dyeing, ultrasonic.
Separable designed filter equipments
Heating device for compressor
Stainless steel warm-keeping water tank
High voltage protection, motor protection and phase sequences relay
Electrical cabinet combining with CE parts
Turkish-English warning labels and manual instruction
Cooling capacity: 22000 Kcal / h
Compressor power: 10 kw
Chilled water pump power: 1.1 kw
Max flow rate of the chilled water: 300 L/min
Intel flow and water discharge pipe: 2.5’
Capacity of water tank:  85 L/m
External dimensions: 800x1600x1500 mm
Compressor: All voticity closed
Cooling capacity: 16.500 Kcal / h
Compressor power: 8 kw
Chilled water pump power: 1.1 kw
Max flow rate of the chilled water: 300 L/min
Intel flow and water discharge pipe: 2.5’
Capacity of water tank:  85 L/m
External dimensions: 800x1600x1500 mm
Compressor: All voticity closed

Air Discharge: 3.3m3 / min
Pressure: 4.0 Mpa
Motor Power: 2*18.5 Kw
Tank – no
Runing Spreed: 730 R.p.m
Weighy: 1250 kg
Dimensions: 2800*1200*2000 (mm)

Contain Capacity: 0.6 m3
Pressure: 4.0 Mpa
Diameter: 700 mm
Weight: 490 Kg
Dimensions: 1200*1100*1650 (mm)

Air Discharge:2.0m3 / min
Pressure: 1.2 Mpa
Motor Power: 15 Kw
Tank: 0.36 m3
Runing Spreed: 870 R.p.m
Weighy: 600 kg
Dimensions: 1900*900*1700 (mm)

Air Treatment Capacity: 3.8 m3/min
Working Pressure: 4.0 Mpa
Filter Grade: CTHA Four-grade
Power: 1.2 Kw
Refrigerant Type: R22
Dev-Point: 2-10 C
Residual Oil Content: 0.003 P.p.m.
Solid Particle Below: 0.01 pm
Dimensions: 1200*600*1240 (mm)

Air Treatment Capacity: 2.6 m3/min
Working Pressure: 1.35 Mpa
Filter Grade: CTA Three-grade
Power: 0.90 Kw
Refrigerant Type: R22
Dev-Point: 2-10 C
Residual Oil Content: 0.01 P.p.m.
Solid Particle Below: 0.01 pm
Dimensions: 1200*600*1320 (mm)