TSP-X 60 70gr 60 PLASTIC INJECTION MOLDING MACHINE WITH ASSISTANT EQUIPMENTS
 
Category
:
PLASTIC INJECTION MACHINES (EKO)
Product Name
:
TSP-X 60 70gr 60 PLASTIC INJECTION MOLDING MACHINE WITH ASSISTANT EQUIPMENTS
Product Description
:
Block joint - clamp system, high strength, clamp control, open loop proportional system, precision mold protection, faster communication, as well as functionalities  of the machine such as electronic power control are the first things that comes to mind.
 
Request a Bid
Required Field:200 m2
Total Electricity Consumption:30 kW 380 3 phases
Origin:TURQUE
Capacity:Variable selon le produit
Number of Employees:1 PERSON
Required / Air, Water and Fuel:6 Bar Air Presseure
Products
PLASTIC INJECTION MOLDING MACHINE  (TSP-X 60)
KEBA controller
10" Color LCD screen
Multi languages control panel (6 different languages Turkish, English, German, Russian, Spanish, Arabic)
BOSCH - REXROTH directions valves
NOVOTECHNIK ruler
YUKEN PQS proportional valve
VICKERS pump
INTERMOT hydro motor
3 Core Valves, k air valves
1 Core valve function with electrical
Screw with mixer
Robot interface according as Euromap 12 and 67 for robots
Remote control
T-Slots platens according as Euromap standard
Back pressure valve
Suck back function
Auto purge system
7-stage set of injection speed, pressure and position.
High speed function
3-stage set of pressure keeping speed, pressure, position
Automatic mold adjustment function
Unlimited mold data capacity (with USB, ethernet interface)
High precision mold protection function
3-Stage ejector system
Linear displacement transducer controls clamping position
Automatic central lubrication system
Central lubrication level and pressure sensor
Hydraulic oil tigh temperature alarm
Hydraulic oil level alarm
Micro filter system oil cleaner (RRR)
Suction filter according as euro standard
BY pass oil filter
Ceramic heater band
S.S.R temperature control
Photo sensor
Cooling water regulations with flow control and temp, indicator
Phase sequences and phase protection relay
Door safety relay
EMI - Electro magnetic interference filter
Provided mechanics, hydromechanics, electric safety system
Turkish-English warning labels
USB data connecting
Hopper dryer and auto-loader units
Movements stage and custom options can be configured from operator panel
INJECTION UNIT UNIT A B C
Screw Diameter: mm 30 32 34
ScrewL/D Ration: L/D 22,4 21 19
Shot Volume: cm3 72 93 110
Shot Weight (PS): g 70 85 100
Injection Rate: g / s 72 88 105
Plasticizing Capacity: g / s 8,9 11,6 12,7
Injection Pressure: Mpa              213 180 166
Maximum Screw Speed rpm: 0-250 0-250 0-250
CLAMPING UNIT UNIT AB C
Clamping Force: kN 600 600 600
Opening Stroke: mm 290 290 290
Space Between Tie Bars mm:300 x 300 300 x 300 300 x 300
Maximum Mold Height: mm 320 320 320
Minimum Mold Height: mm 110 110 110
Ejector Stroke: mm 80 80 80
Ejector Force: kN 27 27 27
Number Of Ejector: unit 1 1 1
GENERAL: UNIT A B C
Maximum Operating Pressure: Mpa 16 16 16
Pump Motor:  kW 9,5 9,5 9,5
Heating Capacity: kW 5,85 5,85 5,85
Oil Tank Capacity: L 200 200 200
Machine: 3,9 x 1.15 x 1.65          
Dimension (LxWxH): m
Machine Weight: t 2,5 2,5 2,5
 
 
CHILLER (OPTIONAL) (RCM-8 A)
New-designed RCM series industrial chillers are used R407C environmental-friendly refrigerant for efficient cooling. RCM series industrial chillers with P.I.D. control are capable of controlling precisely the molding cycle and speed production formalization. The principle of heat exchange can achieve rapid cooling, stable temperature controlling and will be little effected by the surrounding factors. Therefore they are necessary good equipments modern industry. Except plastic industry, RCM series is suitable electroplating, foodstuff, electronic products, bleaching and dyeing, ultrasonic.
 Separable designed filter equipments
Heating device for compressor
Stainless steel warm-keeping water tank
High voltage protection, motor protection and phase sequences relay
Electrical cabinet combining with CE parts
Turkish-English warning labels and manual instruction
Cooling capacity : 22000 Kcal / h
Compressor power: 10 kw
Chilled water pump power : 1.1 kw
Max flow rate of the chilled water : 300 L/min
Intel flow and water discharge pipe  : 2.5’
Capacity of water tank:  85 L/m
External dimensions: 800x1600x1500 mm
Compressor: All voticity closed
Cooling capacity : 16.500 Kcal / h
Compressor power: 8 kw
Chilled water pump power : 1.1 kw
Max flow rate of the chilled water : 300 L/min
Intel flow and water discharge pipe  : 2.5’
Capacity of water tank:  85 L/m
External dimensions: 800x1600x1500 mm
Compressor: All voticity closed
PLASTIC GRANULATORS (OPTIONAL) (RG-2630)
RG-26/36 series granulators, as standard granulators, is suitable for granulate various soft and hard plastics. This series granulator is capable of meeting wants perfectly when optional features add. RG26/36 series granulator has a different head design with magnetic iron and sound-proof double layers.
Equipped with shock-proof double layer of body and head, reduce the noise
Of vibration
Separable design, the bunker, main body, mesh frame are dismounted easily
Inlet chamber with magnetic iron (optional)
With vibration-resistant feet, reduce the noise of vibration
Electrical cabinet combining with CE parts
Safety switches with CE on the feed hopper and screen box
High voltage protection, motor protection and phase sequences relay
Special cutter design made of high-chrominum blades
Water cooling system *
Turkish-English warning labels and manual instruction
Max capacité de coupure: 270 x 350 kg/hr
Taille de la feding Inlet: 260 x 300 mm
Taille de l'écran: 10 inc
Quantité d'aubes fixes:2
Quantité de lames rotatives: 9
Puissance: 5,5 kw
Poids: 360 kg
External dimensions:810x1250x1540 mm