SMCM-16 CHAINE DE PRODUCTION MOULAGE PAR COMPRESSION CONTINU 7500-8200PCS/HR
 
Catégorie
:
MACHINE POUR BOUCHON
Nom Du Produit
:
SMCM-16 CHAINE DE PRODUCTION MOULAGE PAR COMPRESSION CONTINU 7500-8200PCS/HR
Description Du Produit
:
 
Demander Offre
Champ Obligatoire:500 m2
Consommation Totale D'électricité:380V/3PH/50HZ, 220V/1PH/50HZ
Origine:TURQUE
Capacité:7500-8200pcs/hr
Nombre d'Employés:3 PERSON
Obligatoire / Air, Eau et Carburant:10 Bar Air Presseure
Produits
MACHINE DE MOULAGE DE BOUCHON PAR COMPRESSION AVEC 16-CAVITES MOULAGE PAR COMPRESSION  (SMCM-16)
For producing the plastic caps, the injection molding
system is the traditional way and Plastic
just worked with this system in the past years while
we are already seeking the better solution for our
customers. In 2011, Smargon launch the brandnew
product, SMCM (cap compression molding
system) for plastic closures, a new alternative
solution for our customers who need to produce the
caps.
Controlled by Siemens PLC, actions carried out by
the Omron frequency convertors, YUKEN hydraulic
rotary compression system & hydraulic mold
open/close system, the special designed extruder
with efficiency heating unit, plus our huge
experience in the caps’ injection molding & concern
on closures development and testing ensures
extremely high level of this new product suitability.
In one words, SMCM cap compression molding
system can offer you an advantage within the
compression in terms of lower production costs and
product better quality.
Less Energy Consumption
Lower heating temperatures required in the
plasticization in the cap compression and
accordingly the energy consumption of the heating
elements will be less. As the result, the cooling
requirement for heat occurred is less. So, low heat
energy requirement and low cooling energy
requirement make overall energy savings per cap
produced can be as high as 45% comparing with
that by injection molding.
Products Have No Gate
Due to there is no injection point in the compression
molding, it bring a flat surface in the cap product,
which guarantees better aesthetic appearance and
printing results.
At the same time, also due to no injection point,
there is no strain put on the molten resin to be
formed under the high pressure, the molding
pressure for cap forming being equal, which
provides mechanical properties and a consistency
Modèle: SMCM-16
Cavités de moule:16
Capacité: 7500-8200pcs/hr
Diamètre de bouchon:20-35mm
Hauteur de bouchon:10-30mm
Matériel disponible: PP, HDPE, LDPE
Puissancede  Moteur:11kw
Puissance de Température:9kw
Puissance d’Installation:20kw
Norme de tension:380v/3ph/50hz
Consommation d’Air:0.9m3 /min, 8bar
Refroidissement de l'eau  pour le moule:6500Kcal/hr (3hp)
Refroidissement de l’Eau pour l’huile hydraulique:6500Kcal/hr (3hp)
Dimension de Machine:2660x1200x2000mm
Dimension de coffre electique:800x400x1800mm
Poids de Machine:2.1ton
AUTO CHARGEUR (SAL-460)
Autoloader is the one for conveying material over long distance. To suit to the different conveying application, Smargon Plasrtic can provide the variety model of autoloader for customer's kind selection. Standard features include automatic filter cleaning, stainless steel bowl, cloth filter, microprocessor control and motor overload protection.
Modele: SAL-460
Type de Moteur:induction
Puissance de Moteur (kw):0.75
Capacite de transport (kg/hr):300
Dimensions(L*W*H):450*450*780
TYPE D’EAU AIR-COOLING (MARQUE SHINI) (SIC-8A)
SIC-A series of air-cooled industrial Chillers use a single closed-loop design for pressurised refrigerant and are intended for plastic industry. The precision temperature control is required when cooling mold temperature to achieve higher quaility of the product surface finish lower cycle time. The compact and moveable characteristics are best for machine side cooling. Working under the basic principle of heat exchange, they are mostly used with industrial processes that require flow of precisely controlled chilled water. The high pressure water pump with large flow is available for PET preform injection process.
Features:
The tube-in shell condenser design for quick heat transfer and excellent heat radiation.
Refrigeration loop controlled by high & low pressure switches.
High/Low pressure safety relay protects the compressor.
Freeze protection valve is installed for compressor safety.
The proper three phase pump size matches your process flow and pressure requirement.
The drying filter cleans and dries the refrigerant to protect the system from moisture or other contaminants.
Equipped with inslated watre tank
R22 refrigerant used as standard for efficient cooling
Capacité de Refrigération KW:19.08
Kcal/hr:16405
Compresseur: kw 5,5
HP:8
Refrigérant Mode de commande Valve thermostatique d'expansion
Type:R22
Evaporateur type modèle de Tube-dans-coquille
Type:modèle de Tube-dans-coquille
Condenseur type:0.36
Ventilateur(kw):85
Reservoir d’Eau:(L)1.35
Pompe:Puissance(kw) 100
Flux(L/min)                       
Pression de Travail (Bar):2,5
Puissance Totale: Kw 7,2            
Dimensions: L(mm) 1582
W(mm):740                      
H(mm):1350
Poids:kg 426
COMPRESSEUR D’AIR LP (SW-2.0/10)
Compresseur d'air de basse pression
Procédé de moulage par étirage-soufflage, le compresseur d'air de basse pression sera utilisé pour fournir l'air comprimé pour l'action du machine. Selon la condition différente dans divers caisse de souffllage, à piston et à vis. Compresseur d'air à piston de basse pression:
type économiseur d’energie
refroidisseur d’air
avantages de structure simple et compacte
basse consommation d’huile
A faible bruit
operation régulière
excellente performance
longue durée de vie
Entretien facile
Puissance de moteur prime:(kw) 15
Vitesse nominale (R/min): 890
Livraison d’Air (M3/min): 2,0
Pression de travail (Mpa): 1,2
Reservoir d’Air: (M3) 0.36
Dimension: (L x W x H) mm 1800x860x1600
DESSICATEUR D’AIR ET FILTRE LP (SMLY-204)
Unique air treatment design with more strengthen, 50% over the mark
Famous brand components, high stability, high applicability, high efficiency
Compact & integration configuration, compact layout plant, only 20% of the common linearity arrangement
Friendly Air cooling type pre-cooler arranged, save the invest, energy usage and low pressure drop
Uniform rearward water drain device, taking the silage away more easy
Only one replaceable part-filter core element, simple installation, easy operation
Multiform protect system ensure the safe working
Unique bypass design and convenience for maintenance
Capacitéde Traitement d’Air:(m3/min)2,0
Sortie d’Air sous pression: (Mpa) 1.35
Précision filtrante de catégorie C:contenu d'huile résiduel maximal 5ppm,particules solides３ūｍ
Précision filtrante de catégorie T contenu residuel d’huile maximal 1ppm,particules solides 1ūｍ
Précision filtrante de catégorie A ontinu residuel d’huile maximal 0.01ppm,particules solides 0.01ūｍ
Dimention de machine: 1,2*0,7*1,2
MACHINE DE DECOUPAGE (AVEC SYSTEME D’ALIMENTATION DE BOUCHON AUTOMATIQUE) (HYS6A)
MACHINE PLIANTE (AVEC SYSTEME D’ALIMENTATION DE BOUCHON AUTOMATIQUE) (HYF12A)
DOSEUR DE MASTERBATCH  (SCM75-12)
SCM series volumetric doser are suitable for auto-proportional mixing of new material, regrind, master batch and additives. The microprocessor accurately controls rotation of high precise dosing screws to squeeze out material with an accuracy of 1% from set point
Feature:
Everlasting data memorizer and setting storage
Use brushless DC motor and free from maintenance
Microprocessor control, intelligent and accurate in calculcation
External signals can be directly interfaced with the control box
Dosing screw are chrome plated for durability
Comprised by standard modules fro ease cleaning, disassembly and interchangeability
Three-tubes hopper magnet is equipped at the base of the doser to absorb metal impurities to protect the equipemts in next step.
Spécifications
Capacite de Rendement: (kg/hr) 0,2~8
Puissance de Moteur: (w)60
Vitesse de Moteur: (rpm)0~3000
Rapport de vitesse:75,1
Diamètre external de vis: (mm)14